Are you sure you want to perform this action?
CRMX NOVA TX2 RDM
MSRP:
POA
LRINRTX2CRMX
Discontinued Fall 2022. Replaced by CRMX Stardust
CRMX Nova TX2 RDM is a DMX/RDM transmitter for two DMX/RDM universes of up to 1024 channels at a maximum refresh rate. With extensive support for Ethernet-based protocols, it can not only transmit any protocol to listening CRMX receivers but also act as a wired protocol converter at the same time.
CRMX Nova TX2 RDM is a DMX/RDM transmitter for two DMX/RDM universes of up to 1024 channels at a maximum refresh rate. With extensive support for Ethernet-based protocols, it can not only transmit any protocol to listening CRMX receivers but also act as a wired protocol converter at the same time. Any protocol, both DMX, and Ethernet, can be used in any direction. Input DMX and output Ethernet, or the other way around. Merge DMX and Ethernet for redundancy. Use it together with our prized CRMX SuperNova RDM controller and management software or as an RDM proxy with any other RDM compliant controller on the market.
Based on LumenRadio's advanced CRMX technology, the CRMX Nova TX2 RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128-bit encryption, and much more. With support for CRMX Unity, the CRMX Nova TX2 RDM can act as a cross-protocol hub in any DMX system, wired or wireless. Multiple CRMX Nova TX2 RDM units can be combined to transmit several DMX/RDM universes, allowing easy system expansion. The CRMX Nova TX2 RDM is compatible with all other CRMX products, both indoor and outdoor, DMX and RDM.
CRMX Nova TX2 RDM utilizes the international license-free ISM band on 2.4GHz.
- USITT DMX512, DMX512(1990) & DMX512-A
- RDM ANSI E1.20 (Controller and Proxy)
- Streaming ACN (Draft and Final)
- ArtNet I, II & 3
- Pathport
- Strand ShowNet
- ETCNet 2 & 3
- KiNet V1 & V2
- High voltage input: 85-264VAC / 47-70Hz / 22W
- Low voltage input: 12VDC ±20% / 12W
- Overvoltage and ESD protected power inputs
- PoE, Power over Ethernet
- Dimensions (W x H x D): 8.6″ x 1.7″ x 4.9″ (220 x 44 x 160 mm)
- Weight: 900g, 30oz
- Enclosure: Anodized extruded aluminum
- Operational frequency range: 2402-2480 MHz
- Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
- Tested link range: up to 1000 meters line-of-sight
- DMX: 2 XLR Neutrik® 5-pin gold plated male (self terminated)
- Antenna: 2 RP-TNC male
- Ethernet: 1 Neutrik® Ethercon™ RJ45
- AC: IEC 320-C14 male
- DC: Pluggable terminal strip, Phoenix® MSTD 2,5
*Note: LumenRadio reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up-to-date specifications and product details. www.lumenradio.com.
For the most up-to-date Software and Firmware visit https://lumenradio.com/support/.
Related Products
