Are you sure you want to perform this action?
CRMX Outdoor Flex
MSRP:
POA
LRONRFX1CRMX
Discontinued Summer 2024. Replaced by Galileo
CRMX Outdoor™ is an adaptation of the CRMX Nova product line for outdoor use with the same advanced CRMX technology and features for wireless DMX and RDM distribution. With its discreet and secure metal housing and integrated shock absorption, CRMX Outdoor is built to withstand any outdoor environment for many years.
CRMX Outdoor™ is an adaptation of the CRMX Nova product line for outdoor use with the same advanced CRMX technology and features for wireless DMX and RDM distribution. With its discreet and secure metal housing and integrated shock absorption, CRMX Outdoor is built to withstand any outdoor environment for many years. Since all CRMX Outdoor products are IP67 rated, they are not only safe to install in humid environments, it's even possible to submerge the units down to 1 meter in water.
CRMX Outdoor™ Flex is the ultimate wireless DMX and RDM product for any installation. User configurable as either transmitter, repeater or receiver for one (1) DMX/RDM universe in full refresh rate with up to 512 channels.
CRMX Outdoor is an adaptation of the CRMX Nova™ product line for outdoor use and is compatible with other CRMX DMX/RDM products. CRMX Outdoor is the first RDM enabled wireless light control product both waterproof and vandal proof making it suitable for any outdoor installation.
CRMX Outdoor is the worlds first wireless DMX and RDM receiver for outdoor use that is designed to withstand many years of weather forces thanks to its unique combination of an IP67 rated housing and the vandal proof mounting cover.
To fit in to old wireless systems with legacy equipment CRMX Outdoor Flex is compatible with W-DMX™ transmitters when configured in receiver mode. However when using it in this way you won’t get the benefits of the advanced CRMX technology.
CRMX Outdoor Flex have three modes of operation:
Transmitter mode. Ethernet enabled DMX/RDM transmitter with support for Streaming ACN, ArtNet, ETCNet 2 & 3, Pathport, etc.
Repeater mode. The CRMX Outdoor Flex will repeat the wireless DMX and RDM signal making it possible to extend the link range, and enabling more complex network structures.
Receiver mode. Use the CRMX Outdoor Flex together with any other CRMX wireless RDM and wireless DMX products.
CRMX Outdoor utilized the international license free ISM band (2.4GHz).
- USITT DMX512, DMX512(1990) & DMX512-A
- RDM ANSI E1.20
- Streaming ACN (Draft and Final)
- ArtNet I, II & 3
- Pathport
- Strand ShowNet
- ETCNet 2 & 3
- High voltage input: 85-264VAC / 47-70Hz / 3W
- Overvoltage and ESD protected power input
- PoE. Power over Ethernet
- Enclosure: IP67 vandal proof housing
- Dimensions (W x H x D): 7.9″ x 9.6″ x 3.1″ (201 x 244 x 78 mm)
- Weight: 1.6kg, 3.5lbs
- Operational frequency range: 2402-2480 MHz
- Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
- Tested link range: 500m in urban area using 100mW output power mode
- DMX: Pluggable terminal strip, Phoenix® MSTB 2,5
- Antenna: N female
- AC: 13AWG Pluggable terminal strip
- Ethernet: standard RJ45
*Note: LumenRadio reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up-to-date specifications and product details. www.lumenradio.com.
For the most up-to-date Software and Firmware visit https://lumenradio.com/support/.
Related Products
