Are you sure you want to perform this action?
Front diffusion filter for EclNanoPanel TWC
MSRP:
$65.00 USD
PIENPTWCFILTERINT
Available in the following versions:
ENPTWCFILTERHD: is high diffusion and allows less light through, but provides a softer beam quality.
ENPTWCFILTERMD: offers medium diffusion and produces optimal light output and beam quality.
ENPTWCFILTERLD: is less diffusion and therefore allows more light to pass through.
ENPTWCFILTERINT: increases light output by up to 40% while maintaining a homogenized and soft projection of light. The increase in intensity is achieved by conveying some of the spill-light going off to the side and re-directing it in a more straight projection. Light output in the center is increased, keeping the same level of quality.
Typical application of the ENPTWCFILTERINT:
- To homogenize light levels when multiple units are illuminating on the same target, focusing the fixture with an Intensifier filter on the more distant position and the one with a standard MD filter working more near field. This is very common in Motion pictures on green backing studios where fixtures are hung in the ceiling structure but the customer does require a flat lux level on the walls
- Long throw projection where higher intensity is required
- An application requiring a more narrow beam angle
Benefits of the ENPTWCFILTERINT:
- Increased intensity (lux) up to 40%
- Homogenized and soft projection
- 74.8° Half Peak obtained Angle
-
Nothing to download.
| Code | Material | Beam Angle | |
 |
ENPTWCFILTERINT | PMMA | 70° |
 |
ENPTWCFILTERHD | PC | 110° |
 |
ENPTWCFILTERMD | PMMA | 100° |
 |
ENPTWCFILTERLD | PMMA | 100° |
*Note: PROLIGHTS reserves the right to make changes and improvements to any of the products described on this website without prior notice. Specifications are subject to change without notice. Please refer to the manufacturer's web page for the most up-to-date specifications and product details. https://prolights.it.
Related Products
